Cab & Chassis Ram Cummins Full Delete Bundles | 2010-2021

When you install the delete tune, your truck will no longer have emission related codes or warnings. 

This includes all

1) “See Dealer” codes

2) Check engine codes

3) “Exhaust system service required” codes

4) Limp Mode codes

5) Other emissions related diagnostic codes

Please note, these parts are designed to be the best fitting parts for your 3500,4500 and 5500 models, most cab & chassis truck will have different sizes and lengths. We will include all parts required for the installation, however, you may require to perform minor modifications for the DPF/CAT pipe to fit.

Please make sure you check if you have a Cab & Chassis model, you can do that by checking the VIN Number.

Cab & Chassis VINS will say "INCOMPLETE VEHICLE" on the side of the VIN. You can also check by running your VIN number here : Click me to run your VIN number

This kit is compatible with: 2010,2011,2012,2013,2014,2015,2016,2017,2018,2019,2020,2021

3500,4500 & 5500 6.7L Models.

The Full Delete bundle(s) will permanently upgrade your truck to work without the suffocating factory emissions system.

This means you can remove ALL emissions-related parts and sensors for good, including the:

- DPF (Diesel Particulate Filter)

- DEF tank (Diesel Exhaust fluid)

- EGR System (Exhaust Gas Recirculation)

- CAT (Catalytic Converters, including DOC and NOX, etc.)

This is made possible by our custom delete tunes that wipe away the emissions system from your truck’s computer.

All you have to do is: 

Plug the tuner into your truck’s OBDII port (located under the steering wheel)

Follow the tune installation instructions we sent you. (Tech support is also available).

Once the pesky emissions system is “deleted” from your truck’s programming, you can proceed to remove all of the parts that are holding your diesel back from running at its best.

Our kit includes a DPF/CAT delete pipe that bolts in place of the original DPF and CAT in the exhaust system.

Lastly, the EGR delete kit will allow you to fully remove the original EGR system, seal shut the openings, and reroute the exhaust to flow out of the pipe.

The EZ Lynk Package Includes:

1) EZ Lynk Delete Tuner and all required accessories.

2) 4” Stainless Steel Rust Resistant DPF & CAT Delete Pipe

4) Complete EGR Delete Kit

By deleting the factory emission system which has been suffocating your diesel, you’ll immediately notice a night and day difference. It will perform better in every imaginable way, including speed, fuel economy (5 mpg increase on average), and fewer trips to the autobody shop.

Over time, the kit pays for itself with the fuel savings alone. That’s not even considering how many costly trips to the dealer you’ll be saving yourself.

The last benefit is peace of mind, knowing your truck no longer has a ticking time bomb attached to it.

Not tech savvy? Nervous about the software or potentially frying your truck? No worries! With every purchase, we send you a step-by-step instruction guide. Further tech support is also available should any issues arise.

The good news is, our tuners also come preloaded with your delete tune, just plug it into your truck’s OBDII port and follow our instructions to install your tune. 

And yes, if you run into any technical issues, we got your back. You can contact us anytime and we’ll resolve any issues you may encounter.

To install the DPF delete pipe, you’ll need basic tools you probably already own (things like wrenches, ratchets, etc.). There is no welding required; it is installed using bolts and clamps (which we provide).

All of the pieces of the EGR delete kit are bolt on as well, no welding required. We will email you installation videos for these parts as well.

If you are a complete fish out of water when it comes to working on your truck, we highly recommend hiring a shop to do the install for you.

Transmission tuning is including.

The Custom Tunes Includes multiple power levels so you can run your truck the way you want to.

The included switch will let you change between the power levels in real time (aka: "Shift on The Fly").

EZ Lynk Power Settings:

Level 1- "Stock" No added HP. Ideal for daily driving and towing.

Level 2: +50HP. Ideal for daily driving and towing.

Level 3: +100HP. Ideal for daily driving and towing.

Level 4: +150HP. Ideal for performance applications.

Level 5: +200HP. Ideal for performance applications.

Shipping

Once you order an EZ-Lynk, look for an email asking to fill out a custom tune form. Once we receive the completed tune form, we will process your order within 1-2 business days.

Standard shipping will take 4-8 business days.

Express shipping is available at the end of checkout and will take 2-3 business days.

EZ LYNK Return Policy

Your EZ-Lynk purchase contains a VIN specific, custom tune file. As a result it cannot be returned. Once we receive the tune form from you, we will no longer honor the refund of a cancelled order. If you receive a faulty tuner we will replace it. If you experience technical difficulties, contact us at support@thedieseldudes.com if you have any questions.